A 24×24 slab with a 12 in grid of #4 bars and 3 in of edge cover. Change the spacing and bar size to match your plans.
How it works
Bars each way = (slab size − 2 × cover) ÷ spacing + 1. Each bar runs the slab less the cover; bars longer than the stock length get a lap of 40 bar diameters by default.
Example: a 24×24 ft slab with #4 bars 12 in apart and 3 in edge cover needs 24 + 24 bars, 1,208 ft of rebar (64 × 20 ft bars) weighing 807 lb.
At a glance
Same settings as the calculator above, changing only the spacing.
| Spacing | Rebar | 20 ft bars | Weight |
|---|---|---|---|
| 12 in | 1,208 ft | 64 | 807 lb |
| 16 in | 906 ft | 48 | 605 lb |
| 18 in | 805 ft | 43 | 538 lb |
| 24 in | 604 ft | 32 | 403 lb |
Rebar sizes (ASTM A615)
| Bar | Diameter | Weight per ft | 20 ft bar |
|---|---|---|---|
| #3 | 0.375 in | 0.376 lb | 7.52 lb |
| #4 | 0.5 in | 0.668 lb | 13.36 lb |
| #5 | 0.625 in | 1.043 lb | 20.86 lb |
| #6 | 0.75 in | 1.502 lb | 30.04 lb |
| #7 | 0.875 in | 2.044 lb | 40.88 lb |
| #8 | 1 in | 2.67 lb | 53.40 lb |
Common questions
How far apart should rebar be in a slab?
Residential slabs commonly use #3 or #4 bars 12 to 18 inches apart each way, but the spacing should come from your plans or local code.
How much do rebar laps need to be?
Lap length depends on bar size, concrete strength and code. 40 bar diameters is a common rule of thumb: 20 in for #4 bar. Check your plans.
How heavy is rebar?
#3 weighs 0.376 lb/ft, #4 0.668 lb/ft, #5 1.043 lb/ft and #6 1.502 lb/ft under ASTM A615.
Sources
- ASTM A615 bar sizes and weights: https://www.astm.org/a0615_a0615m-22.html